ILav65 Instruction Manual
12. USE OF THE MACHINE
12.1. FLOOR WASHING AND DRYING
Plan the washing and drying route in advance. The longest route follows the perimeter
of the area to be treated. The ideal route has the least turns, stops or brush plate lifting
and lowering (to manoeuvre).
To obtain the best results, the area to be cleaned must be accurately swept prior.
Remove large debris, ropes, straps and cables to avoid them entering
in contact with the brushes or wiper.
If the machine is left on but not moving with the brush plate lowered and operating for
longer than 2 seconds, the solution flow and brush rotation are stopped.
12.2. START OF WASHING AND DRYING
When the machine is used in the presence of people, pay the utmost attention to
unexpected movement. Pay even more attention in the presence of children.
1. The parking brake is always engaged automatically, with machine off with selector
OFF and no operator on the driving seat.
2. Ensure the accelerator pedal is not pressed and turn the ignition key “ON”; the
parking brake is automatically released.
3. Select the desired travelling direction (forward or backward)
4. Press the brush plate lowering switch until it rests on the floor.
5. Press the brush start switch on the control panel. The brush motor is ready to be
started. The brushes will only start turning when the operator starts pressing the speed
pedal,
6. Turn the knob on the panel to adjust solution water opening,
7. Press the vacuum turbine switch on to start the extraction system.
8. Adjust machine speed with the accelerator pedal.
NOTE: Brush rotation and solution flow is automatically interrupted when the operator
decides to stop the machine and no longer presses on the accelerator pedal. Brush
motion and flow automatically resume when the accelerator pedal is pressed again.
12.3. INTERRUPTION OF BRUSH MOTION AND WASHING
1. Press the switch that controls brush rotation on the control panel. The brush motor is
de-activated.
2. Lifting one's foot off the accelerator is also enough to stop brush rotation, the machine
stops and the brushes stop
3. Press the switch that controls complete brush plate lifting, it is
13/08/14 Rev: 2.0.
0 (
TRANSLATION FROM THE ORIGINAL
LANGUAGE)
26
Содержание ILav65
