KlinMak ILav65, Инструкция по эксплуатации

Страница: 36 / 46

ILav65 Instruction Manual
14. MAINTENANCE
14.1. BATTERIES
The batteries supply the power to operate the machine. For the batteries to always assure
peak performance, some maintenance operations must be regularly carried out.
For the batteries to last as long as possible, recharge them every time the charge
indicator reaches about 1/4 of the total charge, shown by the display on the control
panel.
Do not let the batteries run completely down. Never expose spent batteries to
temperatures lower than freezing point, as when the liquid inside them has frozen it
might lead to cracking of the outer plastic casing.
Do not start the machine unless the batteries are in good condition or if the charge status
is lower than 25%.
Never place metal objects on top of the battery, as they might cause a short circuit.
Replace damaged or worn cables or terminals.
Check the electrolyte level in each battery element before and after charging. Never add
acid to the batteries, only use distilled water.
Never let the water level go below the battery plates. The parts of the plates exposed to
air would be damaged. Do not excessively fill the battery. Always securely insert all
caps.
When performing maintenance operations, avoid contact with the acid.
The batteries emit hydrogen. Risk of fire and explosions.
Keep the batteries away from sparks and naked flames.
Remove all caps before charging the batteries.
Exclusively charge Pb batteries in dedicated areas.
Always wear protective gloves and glasses to perform battery maintenance.
Charge the batteries in a well-ventilated area.
When charging the batteries, lift the recovery tank as shown in the photo.
13/08/14 Rev: 2.0.
0 (
TRANSLATION FROM THE ORIGINAL
LANGUAGE)
36