KlinMak ILav65, Инструкция по эксплуатации

Страница: 31 / 46

ILav65 Instruction Manual
To increase solution flow, turn the solution control knob clockwise.
To decrease flow, turn anticlockwise.
Adjustment ranges from 0 litres/minute to 3.5 litres/minute.
If the brush motor is de-activated or if the speed control pedal is in the idle position the
solution flow is automatically interrupted until the brush motor and machine motion are
resumed. This function prevents unintentional discharging of the solution tank and
allows the operator to adjust the solution flow without needing to adjust it again each
time.
13.1.8. CHEMICAL METERING CONTROL KNOB, only for Ki-
Do supplied version (8)
The knob controls the flow of the chemical detergent which is going to be mixed with
the water poured in the clean water tank to form the detergent solution.
To increase the chemical detergent percentage in the aqueous solution, turn the control
knob clockwise.
To decrease the flow, turn anticlockwise.
The solution percentage that may be created ranges from 0% (no chemical detergent
added to the duct that feeds directly the brushes) to 3.5% of detergent volume, with
respect to the volume of water conveyed to the brushes).
13.1.9. BATTERY CHARGE STATUS INDICATOR (9)
The LED display signals the battery charge status.
FOR SAFETY
Do not charge the batteries before using the machine for at least 60 minutes in order not
to damage charging cycles. Pay attention to the battery charging operation, as explained
in the relevant paragraph 14.2.
13.1.10. HOUR COUNTER (10)
The display indicates the machine's operation hours since control unit activation when
the washer dryer was constructed. The hour counter activates at the start of brush
rotation and de-activates when they stop. Therefore machine movement hours are
measured.
13.1.11.ACOUSTIC SIGNAL (11)
The button activates the beeper.
13/08/14 Rev: 2.0.
0 (
TRANSLATION FROM THE ORIGINAL
LANGUAGE)
31