ILav65 Instruction Manual
5.
CE PLATE POSITION
The technical specifications plate bearing the CE marking is attached on the steering
upright, it is adhesive and must not be removed for any reason.
6.
MACHINE TRANSPORT AND LIFTING
Lift the brush plate before proceeding with transport. Place the machine on a pallet,
taking care to lock the wheels to prevent the machine from moving.
Transport and any lifting must be done with the machine on a pallet.
It is recommended to empty the solution recovery tanks.
In the event of loading the ILav65 Scrubber Dryer on a vehicle with ramp, or in any case
every time it is required to drive it on a steep ramp, it is recommended to lift the brush
plate and take down the splashguard and brushes.
7.
INTENDED USE OF THE MACHINE
ILav65 is a Scrubber-Dryer machine, driven by an operator seated on board, to wash and
dry hard floors, battery powered, intended for commercial use.
The machinery applies a detergent solution to the hard floor, a solution that is collected
in the solution tank and is conveyed through suitable piping to the brush plate, with
solenoid valve adjustable flow, it scrubs the floor by the combined action of two
counter-rotating brushes and then draws the dirty water into the recovery tank.
It is also possible to spray the floor with water, actuating the brushes only for scrubbing
and cleaning, without drying.
13/08/14 Rev: 2.0.
0 (
TRANSLATION FROM THE ORIGINAL
LANGUAGE)
20
Содержание ILav65
