Klein Tools KTB500, Инструкция по эксплуатации, Страница: 5 / 16

5
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street Lincolnshire, IL 60069
1-800-553-4676
customerservice@kleintools.com
www.kleintools.com
CLEANING
Be sure that KTB500 is disconnected from all input power sources and output devices. Use a clean, dry, soft-lint-free cloth to wipe down the unit. Remove any
debris, dirt, or other blockages on both side vents. When cleaning debris from the side vents, do not allow the debris, dirt, or other blockages to enter the body of
KTB500.
Do not use abrasive cleaners or solvents.
Do not use compressed air to clean side cooling vents, as this will force foreign particles into the internal circuitry.
To avoid the risk of electrical shock, DO NOT use metal objects to clean ports.
MAINTENANCE
Recharge as needed. There are no pre-designated intervals at which to recharge as long as the KTB500 is being used regularly. Avoid discharging completed on a
regular basis, as this can impact overall life.
Regularly inspect all ports and wall charger for any debris, dirt, damage, and corrosion.
DO NOT attempt to fix.
Regularly observe if the side vents are collecting dirt or dust, and clean following cleaning procedures noted in manual.
STORAGE
If storing for more than 1 month, charge completely before storage and recharge approximately every 3 months to avoid full discharge and possible damage.
Store indoors, in cool temperatures, mild humidity, and away from direct sunlight (See GENERAL SPECIFICATIONS section). Leaving in a vehicle or other confined spaces in
extreme hot temperatures can lead to decreased service life, overheating, and fire. Extreme cold conditions below specific storage range can also harm performance and service
life.
Keep away from corrosion chemicals and gases.
After taking out of storage, visually inspect to make sure KTB500 and all accessories look satisfactory. Inspect the intake and exhaust side vents to ensure they are clear of debris.
Allow unit to return to ambient conditions before recharging or charging other devices.
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash or in curbside recycle bin. Items must be properly recycled in accordance with local regulations.
See
www.epa.gov/recycle
for additional information.
TROUBLESHOOTING
KTB500 WILL NOT CHARGE OR OPERATE CONNECTED DEVICES:
• Ensure that the output ports
4
,
6
,
7
,and/or
12
are activated by pressing the button
2
,
3
and/or
14
for the port(s) in use.
• Confirm the connected device is suitable for the KTB500 by reviewing the output specifications provided in the GENERAL SPECIFICATIONS section.
• Confirm the battery is charged by reviewing the charge level
E
. This may need to be displayed by pressing the INFO 11 .
• Verify whether a warning icon
A
,
B
,
C
,
F
is displayed on the LCD
9
.
KTB500 WILL NOT CHARGE:
• Verify that the AC Charger Input
5
is illuminated. If not, the AC charger being used may not be providing an output.
• Confirm that the charger's cord is inserted fully into the AC Charger Input.
• Confirm that the AC Wall Charger
15
is the charger provided with KTB500.
• If the input does not comply with the requirements located in the GENERAL SPECIFICATIONS section, the Low Input Voltage icon
F
may be displayed on LCD screen.
NOTE: The LCD display
9
will provide additional fault codes that can be reviewed in the FEATURE DETAILS section.
NOTES
*APP is a registered trademark of Anderson Power Products, Inc.