Instruction
manual
EK15/50,
EK15/50G,
EK35/4
page
36
__________________________________________________________________________________________________________________
In order to safeguard a safe and proper performance of the charging unit the repair and service
of the unit should be made through our Service Center.
5.6. Storage and transport
In order to protect the tool against damages it has to be cleaned carefully after every use and be
put into the transportation case which has to be closed safely. Into this plastic carrying case you
accommodate besides the crimping tool the charging unit, 12 sets of crimping dies and the
instruction manual.
5.7. Reference as to which spare parts can be exchanged by the customer
Within the determined use of the tool only the dies (Pos.-No. 7) are permitted to be changed by
the customer.
6. Troubleshooting
a.) The tool loses oil.
=>
Return the tool to the manufacturer. Do not open it and damage the seals of the tool.
b.) The crimping tool does not reach the final operating pressure.
=>
Stop the crimping process. Actuate the retract slide (Pos.-No. 2) and the operating
switch continuously and simultaneously for about 10 sec. Is the malfunction not be
eliminated by this attempt the tool has to be returned to the manufacturer.
Instruction
manual
EK15/50,
EK15/50G,
EK35/4
page
36
__________________________________________________________________________________________________________________
In order to safeguard a safe and proper performance of the charging unit the repair and service
of the unit should be made through our Service Center.
5.6. Storage and transport
In order to protect the tool against damages it has to be cleaned carefully after every use
and be put into the transportation case which has to be closed safely. Into this plastic carrying
case you accommodate besides the crimping tool the charging unit, 12 sets of crimping dies
and the instruction manual.
5.7. Reference as to which spare parts can be exchanged by the customer
Within the determined use of the tool only the dies (Pos.-No. 7) are permitted to be changed by
the customer.
6. Troubleshooting
a.) The tool loses oil.
=>
Return the tool to the manufacturer. Do not open the tool and damage the seals of the
tool.
b.) The crimping tool does not reach the final operating pressure.
=>
Stop the crimping process. Actuate the retract slide (Pos.-No. 2) and the operating
switch continuously and simultaneously for about 10 sec. Is the malfunction not be
eliminated by this attempt the tool has to be returned to the manufacturer.
