Klark Teknik DN9650, Руководство оператора

Страница: 35 / 50

Ethernet IP Addressing
DN9650/DN9652 Network Bridge
Operator Manual
21
Ethernet IP Addressing
The IP address (default 192.168.10.10) can be changed via the configuration menu to
allow operation as part of an Ethernet network. The default netmask value is
255.255.0.0, but you can also modify this if you want.
>> To change the IP address of the DN965X
1
In the IP Address section of the configuration window, click Change IP
Address.
2
In the New IP Address after reboot field of the Change IP Address window,
type in the desired IP address. The range is 0.0.0.0 to 254.254.254.254.
3
In the New Netmask after reboot field, type in the desired netmask. The
range is 0.0.0.0 to 255.255.255.255.
Note: If you change the netmask, you will have to reconfigure your computer’s
IP address/netmask.
4
Click OK. The Change IP Address window will close. The IP Address section
of the configuration window will now display a new field, which informs yo what
the new IP address will be after reboot. (This field will disappear after a reboot.)
5
For the new IP address and netmask to come into effect, reboot the DN965X by
switching it off and then on again. (The new IP address will be displayed during
startup.)
6
To reconnect to the configuration web page you will need to type in the new
IP address in the browser’s address (see “To connect the DN965X to a computer
and then open its configuration menu in the web browser” on page 4).
If you have changed the subnet, you will also have to reconfigure your
computer’s IP address/subnet mask.
Temporary IP address field