33
Using the induction hob
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show
or
, indicating that the induction hob has entered
the state of standby mode.
2. Place your cookware onto the desired zone.
Make sure that the surface of the hob is clean and dry!
3. Select a heat setting by touching the corresponding or
control.
• If you don’t choose a heat setting within 1 minute, the induction
hob will automatically switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time during cooking.
6. Using the induction hob
6.1 To start cooking
EN
If the display flashes
alternately with the heat setting -
This means that:
• You have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
Note:
No matter which step, please remember to put a suitable pan
on the cooking zone you selected, or the cooker will not work
normal. No heating takes place and the display will then automa-
tically turn off after short time.
