37
DE
Reinigung und Pflege
Backofenlampe wechseln
Bei der Lampenbirne handelt es sich um eine besonders
hitzebeständige Form (230 V, 25 W).
Um diese auszuwechseln, gehen Sie wie folgt vor:
• Trennen Sie in jeden Fall das Gerät von der Stromver-
sorgung (Stecker ziehen oder Sicherung herausneh-
men), da die Fassung unter Strom stehen könnte.
•
Drehen Sie die Glasabdeckung heraus und ersetzen sie die
Birne mit einer neuen des selben Typs (siehe Abbildung
rechts).
•
Schrauben Sie die Glasabdeckung wieder auf.
Einschubgitter abnehmen
Zur erleichterten Reinigung der Seitenwände des Garraums
können Sie die seitlichen Einschubgitter abnehmen:
•
Entnehmen Sie alle Zubehörteile wie Rost oder Backblech.
•
Drücken Sie das Einhängegitter an der Klemmstelle leicht
nach unten (
1
) und ziehen Sie es von der Backofenwand weg.
•
Schwenken Sie das Einhängegitter nach innen und hängen
Sie es oben aus (
2
).
Einschubgitter einsetzen
•
Hängen Sie das Gitter oben in die Löcher ein (
2
) und
schwenken Sie es zur Ofenwand hin.
•
Drücken Sie den Gitterstab an der Klemmstelle etwas nach
unten (
1
) und drücken Sie das Gitter zur Seitenwand hin.
•
Das Einhängegitter muss einrasten und fest sitzen.
Teleskopauszugschienen
Zum Reinigen der Einschubgitter können die Teleskopauszug
-
schienen abgenommen werden.
•
Lösen Sie mit einem großen Schraubenzieher die Befes
-
tigungsschrauben unten und nehmen Sie die komplette
Garnitur vom Gitter ab.
•
Reinigen Sie die Teleskopauszüge nur mit handelsüblichen
Reinigungsmitteln von außen.
Tauchen Sie die Teleskopauszugschienen nicht in Wasser
und reinigen Sie sie nicht in der Geschirrspülmaschine!
•
Nach der Reinigung setzen Sie die Teleskopauszugsschie
-
nen wieder auf und befestigen Sie sie unten wieder mit den
Schrauben.
Achtung!
Die Rollen dürfen nicht eingefettet werden.
!
2
1