background image

Assembly and Operating Instructions for  

Phoenix 4 Burner Black and Phoenix 4 

Burner SS Gas Barbecues 

EN (Europe) 

 
 
 
 

 

WARNING 

• 

For outdoor use only. Not for commercial use.

 

• 

Read instructions before using the appliance. Failure to follow instructions could 
result in death, serious bodily injury, and/or property loss.

 

• 

Warning: accessible parts may be very hot. Keep young children and pets away.

 

• 

Do not move the appliance during use.

 

• 

Turn off the gas supply at the gas bottle after use.

 

• 

Any modification of the appliance, misuse, or failure to follow the instructions 
may be dangerous and will invalidate your warranty. This does not affect your 
statutory rights.

 

• 

Retain these instructions for future reference. 

 

• 

Leak test annually, and whenever the gas bottle is removed or replaced.Check 
that the hose connections are tight and leak test each time you reconnect the gas 
bottle 

• 

For Flare-up control please refer to the ‘OPERATION’ section of this manual. 

FOR YOUR SAFETY 

 

If you smell gas: 
1.  Shut off gas to the appliance. 
2.  Extinguish any open flame. 
3.  Open barbecue lid or hood. 
4.  If odour continues, discontinue use and 

contact your local dealer. 

FOR YOUR SAFETY 

 

1.  Do not store or use petrol or other flammable 

vapours or liquids in the vicinity of this or any 
other appliance. 

2.  A gas bottle not connected for use must not be 

stored in the vicinity of this or any other 
appliance. 

0359 

Photographs are not to scale. 
Specifications subject to 
change without prior notice. 

Summary of Contents for Phoenix 4 Burner Black





















Reviews: