
15
Slave Host Setting
If you have multiple PX2500 terminals in a network, you are allowed to designate one of them as a Master terminal. All
the users and fingerprints registered to the Master terminal will be reconciled to all the Slave terminals and all the
clock-In & Clock-Out records on the Slaves will be collected to the Master in real time.
1. Click on [Slave Host Setting] in the left menu to enter the Slave terminal list.
2. Click on a Slave terminal ID(1~30) to enter the detailed setting form.
3. Enable the Slave terminal, enter the IP address it applies and give the terminal a name.
4. Click [Save] to confirm or [Cancel] to discard.
Notice: This setting is only required on the unit that you want to make as Master/Server.
PC Server Info
For editing server information if you choose to install Kizone’s KATES central management software on a PC to
manage all the PX2500 in the network
(this function is to be set up by professional from your product supplier)
.
1.
Enter the IP of the server PC.
2.
Keep the server port 9008 unchanged.
3.
Tick to enable this setting.
4.
Give this PX2500 an ID.
5.
Click [SAVE].
Leave Setting
(this function to be formally announced soon)
For appending different types of leaves.
1.
Click[ADD NEW].
2.
Enter Leave No/ID and Leave Name and click [SAVE].