KitchenAid KHWS01PMT / WH, Техническое образование

Страница: 10 / 86

2-2
Washer Dimensions
Custom Undercounter Installation
The dimensions shown are for the recom-
mended spacing.
Recessed Or Closet Installation
The dimensions shown are for the recom-
mended spacing.
Recessed Area Or Closed Installation
27"
(68.6 cm)
50-1/2"
(128.3 cm)
38"
(96.5 cm)
31-1/2"
(80.0 cm)
1"
(2.5 cm)
1"
(2.5 cm)
39" min
(99.0 cm)
27"
(68.6 cm)
1. Side view - closet or confined area
2. Closet door with vents
"
34
(86.4 cm)
1 2
3"
(7.6 cm)
3"
(7.6 cm)
48 in.
2
(310 cm
2
)
24 in.
2
(155 cm
2
)
1"
(2.5 cm)
4"
(10.2 cm)
31-1/2"
(80 cm)
• Hot and cold water faucets located within
4 ft. (1.2 m) of the hot and cold water fill
valves, and water pressure of 20-100 psi
(137.9-689.6 kPa).
• A level floor with a maximum slope of 1
″
(2.5 cm) under entire washer. Installing the
washer on carpeting is not recommended.
• A sturdy and solid floor to support the washer
with a total weight (water and load) of 400
lbs. (180 kg).
Do not operate your washer in temperatures
below 32
°
F (0
°
C). Some water can remain in
the washer and can cause damage in low tem-
peratures.
Installation Clearances
• The location must be large enough to allow
the washer door to be fully opened.
• Additional spacing should be considered for
ease of installation and servicing.
• Additional clearances might be required for
wall, door, and floor moldings.
• Additional spacing of 1
″
(2.5 cm) on all sides
of the washer is recommended to reduce
noise transfer.
• Companion appliance spacing should also
be considered.
Recessed Or Closet Installation—
Washer On Pedestal
1. Recessed area
2. Side view - closet or confined area
1"
(2.5 cm)
31-1/2"
(80 cm) 1"
(2.5 cm)
1"
(2.5 cm)
27"
(68.6 cm)
4"
(10.2 cm)
18 min."
(45.7 cm)
2 1