KitchenAid KHEV01RSS - Pro Line Plus Electric Dryer, Техническое образование

Страница: 37 / 112

3-9
CLEANING THE DRYER INTERIOR
To clean dryer drum
1. Make a paste with powdered laundry de-
tergent and very warm water.
2. Apply paste to a soft cloth.
OR
Apply a liquid, nonflammable household
cleaner to the stained area and rub with a
soft cloth until all excess dye is removed.
3. Wipe drum thoroughly with a damp cloth.
4. Tumble a load of clean cloths or towels to
dry drum.
NOTE: Garments which contain unstable dyes,
such as denim blue jeans or brightly colored cot-
ton items, may discolor the dryer interior. These
stains are not harmful to your dryer and will not
stain future loads of clothes. Dry unstable dye
items inside out to prevent dye transfer.
CLEANING THE DRYER EXTERIOR
To avoid damaging the exterior finish, do not
use soap-filled scouring pads, abrasive clean-
ers, steel-wool pads, gritty washcloths or some
paper towels on stainless steel surfaces.
To clean the stainless steel surfaces of the
dryer, use the stainless steel wipes. Rub in
the direction of the grain. Order Part Number
8212510.
To clean the optional decorative mat, remove
it from the top of the dryer, and clean both
sides with an all-purpose cleaner. Rinse with
water and dry with a soft, lint-free cloth. Place
it back on the top of the dryer.
REMOVING ACCUMULATED LINT
From Inside the Dryer Cabinet
Lint should be removed every 2 years or more
often, depending on dryer usage. Cleaning
should be done by a qualified person.
From the Exhaust Vent
Lint should be removed every 2 years, or more
often, depending on dryer usage.
•
•
VACATION AND MOVING CARE
Vacation care
Operate your dryer only when you are at home.
If you will be on vacation or not using your dryer
for an extended period of time, you should:
1. Unplug dryer or disconnect power.
2. Close shutoff valve in gas supply line.
3. Clean lint screen. See “Cleaning The Lint
Screen,” page 3-8.
Moving care
For power supply cord-connected dryers:
1. Unplug the power supply cord.
2. Close shutoff valve in gas supply line.
3. Disconnect gas supply pipe and remove
fittings attached to dryer pipe.
4. Cap the open fuel supply line.
5. Use masking tape to secure dryer door.
For direct-wired dryers:
1. Disconnect power.
2. Disconnect wiring.
3. Make sure leveling legs are secure in dryer
base
4. Use masking tape to secure dryer door.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.