4
INSTALLATION
INSTALLATION
■
■
Determine where to place the top of the installation brackets.
■
➤
Add the desired floor clearance to the ordered height of the shade. The ordered height can
be found on the packaging label. A minimum of
1
⁄
2
" floor clearance is recommended.
■
➤
Measure the total distance up from the floor. This is where to place the top of the installation brackets.
■
➤
A minimum flat vertical surface of 1
1
⁄
4
" is required to mount the brackets.
CAUTION:
The rear of the brackets must be flush against a flat mounting surface. Do not
mount brackets on curved molding.
■
■
Center the brackets on your marks and mark the screw holes.
■
➤
When using extension brackets, mark two screw holes
per bracket.
■
■
Drill the screw holes using a
3
⁄
32
" drill bit.
CAUTION:
Use drywall anchors when mounting into drywall. Use
the drill bit size recommended by the manufacturer.
■
■
Attach the installation brackets using the screws provided.
IMPORTANT:
The front edges of the brackets must be level and
aligned to each other.
■
■
If using extension brackets, attach an installation bracket to the underside of each extension
bracket using the provided screws and speed nuts.
■
■
If using spacer blocks, first attach the installation bracket to the
1
⁄
2
" spacer block before stacking additional
spacer blocks or shims together.
■
➤
Insert the legs of the installation bracket into the tabs on the spacer block.
■
➤
Then rotate the installation bracket back.
■
➤
Use a maximum of three spacer blocks (1
1
⁄
2
") per installation bracket.
Floor Clearance
Top of
Bracket
Ordered
Shade
Height
Tab