19
INSTALLATION
INSTALLATION
Valance Attachment
Attach Valance Clips
■
■
Attach the valance clips to the headrail.
■
➤
Position the bottom of the valance clip under the
bottom lip of the headrail.
■
➤
Rotate the valance clip up to snap it into place on
the top of the headrail.
■
➤
Keep a minimum of 3" between the end of the
headrail and the valance clips.
NOTE:
Be sure to avoid areas where the headrail attaches to the installation brackets.
■
■
See the appropriate page for your type of valance:
■
➤
Aluminum Valance — Below
■
➤
Traditional Valance — Page 20
Aluminum Valance
■
■
Outside mounts and non-flush inside mounts only:
Use the valance corner end caps and locks to attach a return to each end
of the valance.
■
➤
Slide the valance corner end cap onto the valance. Do not hammer the end cap into the valance — the end cap will bend.
■
➤
Slide the valance return onto the corner end cap.
■
➤
Place locks into the circular opening of the valance corner end cap with the prongs facing out.
■
➤
Use a flat blade screwdriver to turn each lock so that its tab fits into the groove on the valance and return. This locks the
valance and return to the end cap.
Headrail
Valance
Clip
Corner End Cap
Locks
Tabs in
Grooves
Tab
Turn
