Kirsch Cellular Shade Collection Скачать руководство пользователя

Страница: 8 / 26

INSTALLATION

■

Insert the stationary rail bottom bracket into the bottom of the stationary rail.

■

➤

The bracket fits into grooves at the bottom of the rail.

■

➤

Insert the bracket with the mounting flanges to the back, away from the fabric stack as shown in the photos. Do not seat
the bracket; about

⁄

" should extend from the rail.

■

➤

After inserting the bracket, peel off the red label.

Install the Rails and Fabric Stack into the Headrail

■

Review the diagram at right to familiarize yourself with where the moving rail
rollers and fabric carrier wheels fit inside the headrail.

■

Insert the moving rail bracket part way into the rear of the headrail.

■

➤

Allow the bracket to move all the way into the headrail as you install the fabric
carrier wheels.

■

➤

Insert the moving rail bracket from the left side for a left stack design or from the
right side for a right stack design.

■

Insert the fabric carrier wheels into the headrail. (Unwrap a small amount of cord from the orange cord organizer if you need
more slack.)

■

➤

The wheels with clear stems fit into the rear channel and the wheels with black stems into the front channel.

NOTE:

The fabric carrier wheels only fit into the rail the correct way; it is not possible to install them into the wrong channel.

Moving Rail

Rollers

Clear Stem

Fabric Carriers

Black Stem

Fabric Carriers

FRONT

Black Stem = Front Channel

Clear Stem = Rear Channel

Moving Rail

Bracket

Left Stack Shown

Содержание Cellular Shade Collection



























Результаты поиска

Содержание Cellular Shade Collection

Отзывы:

Похожие инструкции для Cellular Shade Collection

Бренды по названию

Популярные бренды

Kirsch Cellular Shade Collection, Руководство по установке

Результаты поиска

Содержание Cellular Shade Collection

Отзывы:

Похожие инструкции для Cellular Shade Collection

Бренды по названию

Популярные бренды