Kirsch Cellular Shade Automation III, Руководство по установке

Страница: 20 / 24

19
INSTALLATION
TROUBLESHOOTING
Problem Rechargeable battery needs recharging.
Solution There are two methods for charging the rechargeable battery wand — the dual charging station or the single
charger.
CAUTION: The rechargeable battery wand can only be charged with these Kirsch
®
provided charging options.
Attempting to charge battery wands with an alternative charger may result in permanent damage.
Removing the Rechargeable Battery Wand from the Mount
■
To safely remove the rechargeable battery wand from your shade, grasp the end of the battery wand that is
furthest away from the power socket.
CAUTION: Grasp the wand firmly prior to removal.
■
Using the indentation on the end of the battery wand, use your index finger to pull the battery out of the mount.
NOTE:
The mount should remain installed and plugged into the shade cable during this process. You will simply
remove the wand from the mount.
Recharging Via the Dual Charging Station
■
Plug the dual charging station into a standard AC outlet.
■
Insert the nose of the rechargeable battery wand into one of the slots of the dual
charging station.
■
The battery will firmly snap into place. A red light indicator on the front of the
charging station will turn on when the battery wand has been properly inserted
and being charged.
■
Once the battery has been fully recharged, the red light indicator will turn green.
Charging may take up to three hours, depending on your battery level.
■
Remove the battery wand from the charger.
Recharging Via the Single Charger
Remove the rechargeable battery wand from the mount, or insert the single charger
cable without removing from the shading.
■
Attach the plug adapter to the charger.
■
Plug the charger into a standard AC outlet.
■
Plug the charging cable into the charging outlet on the rechargeable battery wand.
The charging outlet is near the nose of the wand.
■
A red light indicator confirms the battery wand is properly inserted and is charging.
CAUTION: Do not attempt to plug the charging cable into the battery mount’s
power socket. Doing so will not only fail to charge the battery wand but could possibly
cause damage to both the single charger and the battery mount.
■
Once the battery has been fully recharged, the red light indicator will turn green.
Charging may take up to two hours, depending on your battery level.
■
Remove the charging cable from the battery wand.
Reinserting the Rechargeable Battery Wand into the Mount
■
Match the direction of the arrow on the underside of the battery wand with the arrow on the battery mount.
■
Insert the nose of the battery wand into the cavity of the battery mount.
■
Push the battery wand flush into the mount until the battery snaps into place.
Not this
socket