Kirsch Cellular Shade Automation III, Руководство по установке

Страница: 19 / 24

18
INSTALLATION
TROUBLESHOOTING
Problem The shade limits need to be adjusted — top limit.
Solution
See "Electronic Limit Adjustments" on page 16
Problem The shade limits need to be adjusted — bottom limit.
Solution See "Electronic Limit Adjustments" on page 16
Problem The shade limits need to be adjusted — middle rail bottom limit (Top-Down/Bottom-Up and Day/Night only).
Solution
See "Electronic Limit Adjustments" on page 16
Problem Batteries in the battery wand need to be replaced.
Solution Replace the batteries in the battery wand.
Squeeze the cap latch to release the cap and remove the cap
from the battery wand.
Install the batteries according to the instructions on the
battery wand label.
Press the cap on until it latches.
NOTE: Kirsch recommends AA alkaline batteries for use
with our battery-powered shades. These will provide more
than one year of operation, depending on usage. Lithium
and rechargeable batteries are not recommended.
Problem The battery is charged but the shades does not operate.
Solution If your rechargeable battery wand is charged but not working, it may be due to its physical location in your window.
The rechargeable battery wand can operate in temperatures up to 176°F (80°C). If the temperature in your
window exceeds this, its safety feature will shut the battery off temporarily. The battery will turn back on once the
temperature lowers into the operable range.
If you anticipate the rechargeable battery wand consistently exceeding this temperature limit, please reinstall in a
location that avoids direct sunlight.
Cap Latch
Battery Wand
Squeeze