5
INSTALLATION
INSTALLATION
Install the Cassette Bracket
■
The minimum mounting depth required for Automation III shades:
➤
Fully recessed mounting for Automation III shades:
■
Center the brackets on your marks and mark the screw holes.
IMPORTANT:
The front edges of the installation brackets must be level and aligned to each other.
■
Drill the screw holes with a
3
⁄
32
" drill bit.
WARNING:
Product is heavy. Mount into wood/metal studs or into concrete with
concrete anchors. Drywall anchors are not recommended.
■
Use a level to check that the mounting surface is level. Shim the brackets if necessary. Shims are
not provided.
■
Attach the installation brackets using the screws provided.
Install the Back Cover (Optional)
NOTE:
For shades with the optional back cover, install the back cover onto the
clips before installing the cassette into the brackets.
■
Angle the back cover towards the window to hook the top feature of the back
cover with the top tab of the clip.
■
Rotate the back cover towards the room until the bottom feature snaps into
the bottom tab of the clip.
■
Check each clip and ensure the back cover is properly snapped and secured
before proceeding to install the cassette.
Proceed to “STEP 2: Install the Battery Wand (If Applicable)” on page 7.
Minimum IB Mounting Depth
Power Supply
Both Cassettes
Without Back Cover
With Back Cover
Without Battery Wand
1
1
⁄
4
"
1
13
⁄
16
"
Automation III with Attached Battery Wand
1
7
⁄
8
"
2
3
⁄
16
"
Automation III with Rechargeable Battery
Wand
2
1
⁄
4
"
2
9
⁄
16
"
Minimum IB Fully Recessed Mounting Depth
Power Supply
Small Cassette
Large Cassette
Without Back
Cover
With Back
Cover
Without Back
Cover
With Back
Cover
Without Battery Wand
3
9
⁄
16
"
4
1
⁄
8
"
4
1
⁄
16
"
4
5
⁄
8
"
Automation III with Attached Battery
Wand
4
3
⁄
16
"
4
1
⁄
2
"
4
11
⁄
16
"
5"
Automation III with Rechargeable
Battery Wand
4
9
⁄
16
"
4
7
⁄
8
"
5
1
⁄
16
"
5
3
⁄
8
"
4"
Back Cover Clip
Cassette Bracket
Back
Cover
