KIRLOSKAR 65-DSM 315M, Инструкция по установке, эксплуатации и обслуживанию

Страница: 70 / 101

GENERAL INFORMATION & SAFETY REQUIREMENTS
1.0 The products supplied by KBL have been designed with safety in mind. Where hazards
cannot be eliminated, the risk has been minimised by the use of guards and other design
features. Some hazards cannot be guarded against and the instructions below MUST BE
COMPLIED WITH for safe operation. These instructions cannot cover all circumstances;
YOU are responsible for using safe working practices at all times.
1.1 KBL products are designed for installation in designated area, which are to be kept clean
and free of obstructions that may restrict safe access to the controls and maintenance
access points.
A Pump Duty Nameplate is fitted to each unit and must not be removed. Loss of this
plate could make identification impossible. This in turn could affect safety and cause
difficulty in obtaining spare parts. If accidental loss or damage occur, contact KBL
immediately.
1.2 Access to the equipment should be restricted to the personnel responsible for
installation, operation and maintenance and they must be trained, adequately qualified
and supplied with appropriate tools for their respective tasks.
1.3 KBL requires that, all personnel that are responsible for installation, operation or
maintenance of the equipment, have access to and study the product instruction manual
BEFORE any work is done and that they will comply with all local and industry based
safety instructions and regulations.
1.4 Ear defenders should be worn where the specified equipment noise level exceeds locally
defined safe levels. Safety glasses or goggles should be worn where working with
pressurised systems and hazardous substances. Other personnel protection equipment
must be worn where local rules apply.
1.5 Do not wear loose clothing or jewellery which could catch on the controls or become
trapped in the equipment.
1.6 Read the instruction manual before installation, operation and maintenance of the
equipment. Check and confirm that the manual is relevant copy by comparing pump type
on the nameplate and with that on the manual.
1.7 Note the ‘Limits of product application – permissible use’ specified in the manual.
Operation of the equipment beyond these limits will increase the risk from hazards noted
below and may lead to premature and hazardous pump failure.
1.8 Clear and easy access to all controls, gauges and dials etc. must be maintained at all
times. Hazardous or flammable materials must not be stored in pump rooms unless safe
areas or racking and suitable containers have been provided.
1.9 IMPROPER INSTALLATION, OPERATION OR MAINTENANCE OF THIS KBL PRODUCT
COULD RESULT IN INJURY OR DEATH.
2.0 SAFETY INSTRUCTIONS WHILE HANDLING AND STORAGE
When lifting the pump, use the lifting points specified on general arrangement drawing.
Use lifting equipment having a safe working load rating suitable for the weight specified.
Use suitable slings for lifting pump which is not provided with lifting points. The use of
fork-lift truck and chain crane sling equipment is recommended but locally approved
equipment of suitable rating may be used.
-i-