KIPI ecoMAX920 P1-CH, Руководство по эксплуатации и установке

Страница: 8 / 34

8
3 Controler peration
3.1 Decription of main screen
Main menu view
.
Legend:
1. Regulator operation modes: FIRING
UP,
OPERATION, SUPERVISION,
BURNING OFF, CLEANING, STANDSTILL,
MANUAL.
2. Value of the preset air supply
temperature - holding it down longer
edits the value.
3. The value of the measured air supply
temperature.
4. Enter the menu list.
5. Information field:
- burner fan work;
- main feeder work;
- feeder work;
- igniter work;
- rotavie chamber work;
- work on a reserve boiler.
1. Temperature measured in the room
(1st heating zone) by the built-in
thermostat.
2. Value of the set temperature in the
room of the first heating zone.
3. Clock and day of the week.
4. Value of the external temperature
(weather)
- available only after
connecting the external temperature
sensor.
Both the right window and the left
window on the main screen can present
various information - by touching it is
possible to change the information
presented.
3.2 Turning the stove on and off
The stove is started by pressing any place
the screen with the inscription "Stove off",
then the following message will appear: Turn
on the regulator?
There is a second method to turn on the
stove. Press the menu button and then press
the button . To turn off the stove, press
the menu button and then press button
then the stove will go into the
extinguishing process. Only after the end of
the blanking, the screen with the text "Stove
off" will appear.
Setting the set temperature
The preset air supply temperature to the
room is set in the menu:
Device settings
→
Airflow preset temperature
The value of the parameter.
FIRING UP mode
The FIRING UP mode is used to automatically
fire up the furnace. The total duration of the
firing-up process depends on the regulator
settings and the state of the furnace before
firing up. Parameters influencing the firing up
process are grouped in the menu:
Service settings
→
Burner settings
→
Firing
up
If the furnace has not been ignited, further
attempts are made to fire it up, during which
the fuel dose is reduced to 10% of the first
attempt dose. Successive firing up attempts
are signaled on the screen by numbers next
to the igniter symbol . After three
unsuccessful attempts, the alarm
"Unsuccessful attempt to light the furnace" is
reported and the furnace operation is
stopped. The furnace operation cannot be
continued and user intervention is required.
After removing the causes of the inability to
light the stove, restart it.