Kioti RX6010C Скачать руководство пользователя страница 79

Страница: 79 / 218

description oF operating system

hAND ThROTTlE lEvER

(1) hand throttle lever

: "slow"

: "Fast"

M55O4M2A

M55O4M3A

DIFFERENTIAl lOCK PEDAl

the hand throttle lever is to control

the engine rpm. the engine acceler-

ates to its full speed by pushing the

hand throttle lever ( position) com-

pletely out while pulling the lever

( position) decelerates the engine.

the hand throttle lever is mainly used

while working in a field.

(1) lock pedal

(a) release to "disengage"

(b) depress to "engage"

the differential lock is to secure the

differential system and keep the

wheel rotation on both sides the

same in order to enhance the trac-

tion of the rear axle.
depressing the pedal engages the

differential lock while releasing the

pedal disengages the differential

lock.
Use this system under the following

conditions:



Do not use the hand throttle le-

ver while driving on the public

road. Otherwise it can lead to an

accident as it becomes hard to

decelerate the tractor rapidly.

CAUTION

1. when any wheel slips and the

tractor does not move in the field.

2. when it is hard to escape a soft or

muddy field.

The differential lock should be

engaged only while the driving

clutch is engaged. If the differ-

ential lock pedal does not move

when depressing it, try to de-

press it again after releasing it.
when engaging the differential

lock, reduce the engine speed.

After engaging it, accelerate

the tractor.
Make sure to set the steering

wheel in the straight ahead po-

sition while the differential lock

is in use. Otherwise, the differ-

ential system can be damaged.

•

CAuTION

M55-유럽판-04.indd 27

2011-08-11 오전 11:58:34

Содержание RX6010C



























































































































































































































Результаты поиска

Содержание RX6010C

Отзывы:

Kioti RX6010C, Руководство пользователя, Страница: 79 / 218

Результаты поиска

Содержание RX6010C

Отзывы: