Kioti RX6010C, Руководство пользователя, Страница: 111 / 218

5
-
5
opERATIoN
5
9. Insert the key into the key switch
and turn it "oN" and maintain it
until the preheat lamp is turned off
(approx. 8 sec.).
In case of not enough auto pre-
heating, hold the key in "A" (pre-
heat) position for several seconds
for manual pre-heat. during the
same seconds, the pre-heat lamp
on the dash board illuminates.
It is normal that the charge warn-
ing lamp and engine oil pressure
operating principle of auto pre-
heating system.

The glow plug lamp comes on
for 8 seconds and then goes off
when the key switch is turned to
the "Start" or "Stop" position.
The engine should be started
within 5 seconds after the glow
plug lamp goes off. After the en-
gine is started, post-heat is per-
formed for 15 seconds with the
key switch in the "oN" position.

The post-heating is a function to
keep the glow plugs activated
for approx. 15 seconds after
the engine is started in order to
enhance the engine combus-
tion performance and to reduce
harmful emissions right after en-
gine start.
NOTE
warning lamps come on when the
key is in "oN" position before the
engine start.
10. When the engine is started, re-
lease the key. Then, the key is
automatically turned back to the
"oN" position.
11. Warm up the engine for 3 to 4
minutes (10 minutes in winter)
after releasing the clutch pedal.

Never operate the start motor
for more than 10 consecu-
tive seconds as it consumes
an excess of battery power. If
the engine cannot be started
within 10 seconds, wait for 30
seconds and try again.

Never try to crank while the
engine is running.
WARNING
(1) key Switch (A) pre-heat (B) Stop
(C) ACC (d) oN (E) Start
M55O4K6A
M55-유럽판-05.indd 5 2011-08-11 오전 11:57:01