Kioti RX6010C Скачать руководство пользователя страница 34

Страница: 34 / 218

rX6010c / rX6010pc

7. part no. : t4930-52351

9. part no. : t4930-52431

8. part no. : t4930-52381

5. part no. : t4682-53552

6. part no. : t4930-52471

Do NOT run an engine in an

enclosed area.

Exhaust fumes can cause

sickness or possible death.

Do NOT touch a muffler with

bare hands.

WARNING

1. Be sure to follow instructions specified in

the manual and the safety decals.

2. make sure to follow the driving instruc-

tions specified in the manual and decals

for safe driving.

3. do not modify any part of the vehicle.

4. Never attach an implement with exces

sive capacity other than the standard

implements.

kioti has no responsibility for problems oc-

curred by negligence of a driver.

WARNING

1. Turning on the A/C for an extended period of

time makes the air stuffy in the cabin. make
sure to ventilate the cabin regularly.

2. sleeping with the a/c on can cause suffoca-

tion.

M55-유럽판-01.indd 22

2011-08-11 오전 11:55:58

Содержание RX6010C



























































































































































































































Результаты поиска

Содержание RX6010C

Отзывы:

Kioti RX6010C, Руководство пользователя, Страница: 34 / 218

Результаты поиска

Содержание RX6010C

Отзывы: