Kioti RX6010C Скачать руководство пользователя страница 10

Страница: 10 / 218

SAFETY AND VEHICLE DAMAGE WARNING

This manual includes information titled as

WARNING, CAUTION, IMPORTANT

and

NOTE.

These titles indicate the following:

NOTE

This indicates that interesting or helpful information is being pro

vided.

WARNING

This indicates that a condition may result in harm, serious

injury or death to you or other persons if the warning is not

heeded. Follow the advice provided with the warning.

CAUTION

This indicates that a condition may result in damage to your

vehicle or its equipment if the caution is not heeded. Follow

the advice provided with the caution.

This mark indicates emphasis on notable characteristics of

working procedures, and information about technology for

easier operation.

IMPORTANT

M55-유럽판-00.indd 10

2011-08-10 오후 2:16:23

Содержание RX6010C



























































































































































































































Результаты поиска

Содержание RX6010C

Отзывы:

Kioti RX6010C, Руководство пользователя, Страница: 10 / 218

Результаты поиска

Содержание RX6010C

Отзывы: