Kioti L3503 Скачать руководство пользователя страница 89

Страница: 89 / 128

-11

PERIODIC SERVICE

1. Inspect the instrument panel for

broken gauge(s), meter(s) and

Easy Checker lamps.

2. Replace if broken.

ChECKINg hEAD LIghT,

hazaRD liGht etc.

1. Inspect the lights for broken bulbs

and lenses.

2. Replace if broken.

checkinG seat Belt anD

ROPs

1. Always check condition of seat

belt and

ROPs

attaching hard-

ware before operating tractor.

2. Replace if damaged.

ChECKINg gAUgES, METER

anD easY checkeR

(1) Radiator Screen

(A) DETACH

CLEANINg gRILL, RADIATOR

scReen

1. Check front grill and side screens

to be sure they are clean of de-

bris.

2. Detach the radiator screen and re-

move all the foreign material.

621Oa06a

caUtiOn

To avoid personal injury:



Be sure to stop the engine be

fore removing the screen.

iMPORtant



grill and screen must be clean

from debris to prevent engine

from overheating and to al

low good air intake for the air

cleaner.

L3503_LK45-호주향-06.indd 11

2008-12-18 오후 1:53:17

Содержание L3503

































































































































Результаты поиска

Содержание L3503

Отзывы:

Kioti L3503, Руководство пользователя, Страница: 89 / 128

Результаты поиска

Содержание L3503

Отзывы: