Kioti L3503, Руководство пользователя

Страница: 45 / 128

5
-
OPERATION
5
Insert the key, turn it once clockwise,
and then it is located on ACC posi-
tion and the work lamp and wiper
can be operated. turn it once more
clockwise and then electric circuit is
connected and it is located on KEY
ON position.At KEY ON position,
the engine oil pressure lamp(red)
and the electric charging warn-
ing lamp(red) illuminate, preheating
is automatically operated, the pre-
heating lamp(Orange) illuminates
(1) Key Switch STOP
ACC KEY ON
GLOW START
for about 8 sec., and then turned off.
If the key switch is fully turned right
with the clutch pedal depressed, the
starter motor is started and the en-
gine is runned. If the key is free from
the hand, it is returned to the KEY
ON position.The engine is runned,
the engine oil pressure warning lamp
and electric chargning warning lamp
are turned off.In case of manual pre-
heating, hold the key on the preheat-
ing position during the preheating
time between KEY ON and STATER.
621O507A
iMPortant

.Because. of. the. safety. device,.
the.engine.may.not.be.started.
except.when.the.clutch.is.dis-
engaged.
note

When ambient temperatures are
colder, a longer pre-heat time is
necessary.
WarninG

.Do.not.operate.the.starter.mo-
tor.continuously.for.more.than.
10.seconds.

.if.the.engine.does.not.start;.
turn.the.switch.to.“oFF”,.wait.
30. seconds,. and. repeat. the.
starting.procedure.

.never.engage.the.starter.mo-
tor.before.the.engine.stops.
turning.
L3503_LK45-호주향-05.indd 7 2008-12-18 오후 1:52:42