Kioti L3503 Скачать руководство пользователя страница 10

Страница: 10 / 128

L3503 / LK45

ROPS

should never be modified

by welding, grinding or cutting, as

this can weaken the

ROPS

structure.

If any components of the

ROPS

unit

is damaged, it must be replaced.
If the

ROPS

unit is removed or loos-

ened for any reason, the parts should

be fitted back to their original posi-

tions and all bolts should be properly

torqued.

21. Extra caution should be taken

when driving tractors with narrow

tread widths. For added stability

you should adjust your rear wheel

tread width, see page 5-39.

19. Before starting your tractor you

should depress the clutch and

make sure that all shift levers are

in the neutral position.

20. For your safety

ROPS

with a seat

belt is recommended for most

applications.

(1) Tread

621O106a

621O107a

NOTE



Always use seat belt when the

tractor is equipped with a

ROPS

Never use the seat belt when

tractor is not equipped with a

ROPS

(

ROPS

: Roll-Over Protective

Structures)

L3503_LK45-호주향-01.indd 4

2008-12-18 오후 1:51:47

Содержание L3503

































































































































Результаты поиска

Содержание L3503

Отзывы:

Kioti L3503, Руководство пользователя, Страница: 10 / 128

Результаты поиска

Содержание L3503

Отзывы: