Kioti L3503 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 128

Kioti L3503 Скачать руководство пользователя страница 40

5

-

L3503 / LK45

-  Walk around inspection.
-  Check the engine oil level
-  Check the transmission oil level
-  Check the coolant level
-  Clean the grill and radiator screen.
-  Check the air cleaner and evacua-

tor valve.

- Check the brake pedal
- Check all dash gauges and indica-

tors

- Check head lights, tail lights, and

all working lights.

- Check accessible wiring harness

for any damage.

- Check the seat belt and

roPS

for

damage.

- Refuel (See "daily check" in the

periodic service section)

- Check all danger and warning la-

bels.

Pre-oPeration

DaiLY.CHeCK

It is a good practice to know the con-

dition of your tractor before you start

it. You should do routine check be-

fore each use.

CHeCK.iteM

oPeratinG.neW.traCtor

How a new tractor is handled and

maintained determines the life of the

tractor.
A new tractor just off the factory pro-

duction line has of course been, test-

ed, but the various parts are not ac-

customed to each other, therefore

care should be taken to operate the

tractor for the first 50 hours at a slow

-

er speed and avoid excessive work

or operation until the various parts

become "broken-in." The manner in

which the tractor is handled during

the "breaking-in" period greatly af-

fects the life of your tractor. There-

fore, to obtain the maximum perfor-

mance and the longest life of the

CaUtion

to.avoid.personal.injury:



.Be. sure. to.check. and. service.

the.tractor.on.a. level.surface.

with. the. engine. shut. off. and.

the.parking.brake.“enGaGeD”.



.refuel.(See.“DaiLY.CHeCK”.in.

periodic.service.section.)



.Care. of. danger,. warning. and.

caution.labels.(See.“DanGer,.

WarninG.anD. CaUtion. La-

BeLS”. in.safety. precautions.

section.)

L3503_LK45-호주향-05.indd 2

2008-12-18 오후 1:52:37

«
...
38
39
40
41
42
...
»

Содержание L3503

































































































































Отзывы:

Нет отзывов