Kioti L3503 Скачать руководство пользователя страница 101

Страница: 101 / 128

PERIODIC SERVICE

aDjUstinG Fan Belt

tensiOn

(1) Bolt

(A) Check the Belt Tension

(B) To Tighten

621Oa26a

2. The battery self-discharges while

it is stored.

Recharge it once every three

months in hot seasons and once

every six months in cold seasons.

caUtiOn

To avoid personal injury:



Be sure to stop the engine be

fore checking belt tension.

1. Stop the engine and remove the

key.

2. Apply moderate thumb pressure to

belt between pulleys.

3. If tension is incorrect, loosen the

alternator mounting bolts and, us-

ing a lever placed between the al-

ternator and the engine block, pull

the alternator out until the deflec

tion of the belts falls within accept-

able limits.

4. Replace fan belt if it is damaged.

Proper fan

belt tension

A deflection of between

7 ~ 9 mm (0.28 ~ 0.34 in.)

when the belt is pressed

in the middle of the span.

L3503_LK45-호주향-06.indd 23

2008-12-18 오후 1:53:26

Содержание L3503

































































































































Результаты поиска

Содержание L3503

Отзывы:

Kioti L3503, Руководство пользователя, Страница: 101 / 128

Результаты поиска

Содержание L3503

Отзывы: