Kioti L3503, Руководство пользователя, Страница: 107 / 128

6
-
PERIODIC SERVICE
6
* At 760 mmHg pressure (atmo-
spheric). A higher boiling point is
obtained by using a radiator pres-
sure cap which permits the devel-
opment of pressure within the cool-
ing system.
1. Remove the pipe on the bottom of
the tank and drain the oil.
2. Drain the oil from the return pipe
of the power steering. At this time,
turn the steering wheel complete-
ly clockwise and counterclockwise
two or three times each.
3. Refill the tank with oil via the feed -
ing port. After fully refilling the tank
with oil, turn the steering wheel
completely clockwise and counter-
clockwise two or three times each.
chanGe the POWeR
steeRinG Oil
(1) Return pipe (2) Pipe
(3) Feeding port
621Oa35a
nOte

The above date represents indus-
try standards that necessitate a
minimum glycol content in the con-
centrated anti-freeze.

When the cooling water level
drops due to evaporation, add wa-
ter only. In case of leakage, add
anti-freeze and water in the speci-
fied mixing ratio.

Anti-freeze absorbs moisture.
Keep unused anti-freeze in a tight-
ly sealed container.

Do not use radiator cleaning
agents when anti-freeze has been
added to the cooling water. (An-
ti-freeze contains an anti-corro-
sive agent, which will react with
the radiator cleaning agent forming
sludge which will affect the engine
parts.)
Oil capacity 2 L (0.53 U.S.gal.)
Replace the hoses and clamps.
(See "Checking Radiator Hose and
Clamp" in every 200 hours mainte-
nance.)
RePlacinG POWeR steeRinG
hOse
Replace the hoses and clamps.
(See "Checking power steering line"
in every 200 hours maintenance.)
RePlacinG FUel hOse
Replace the hoses and clamps.
(See "Checking Fuel line" in every
100 hours maintenance.)
RePlacinG RaDiatOR hOse
(WATER PIPES)
L3503_LK45-호주향-06.indd 29 2008-12-18 오후 1:53:28