Kioti Daedong EX35C, Руководство пользователя

Страница: 211 / 229

8
-2
EX35(C)/EX40(C)/EX45(C)/EX50(C)
1. Check the bolts and nuts for loose-
ness, and tighten if necessary.
2. Apply grease to tractor areas where
bare metal will rust also to pivot
areas.
3. Detach the weights from the tractor
body.
4. Inflate the tires to a pressure a little
higher than usual.
TRACTOR STORAGE
DAILY STORAGE
1. Keep the tractor clean when it is
stored. Make sure to wash it after
work.
2. Store it indoors if possible. If it should
be kept outside, cover it.
LONG-TERM STORAGE
3. Remove the battery from the tractor
in winter and store it indoors.
4. Add anti-freeze to the tractor in win-
ter season in order to prevent the
radiator from freezing.
5. Remove the ignition key and store it
separately.
WARNING
!!!!!
When operating the tractor in an
enclosed area, ventilate the area
to release exhaust gas to the
outside. The exhaust gas is col-
orless and not visible, but is
harmful.
IMPORTANT
If the tractor is not used for an
extended period of time, follow
the instructions below to pre-
vent corrosion and performance
deterioration of the tractor while
it is stored.
Follow the instructions below if the trac-
tor is not to be used for a long period of
time (max. 1 year). This is to operate
the tractor again with minimum prepa-
ration after long-term storage. Repeat
this procedure if the tractor hasn’t been
used for one year. 5. Change the engine oil and run the
engine to circulate oil throughout the
engine parts all for about 5 minutes.
6. Use the clutch locking pin to keep
the clutch disengaged. If the clutch
is left engaged for a long period of
time, the clutch plate may rust,
making clutch disengagement im-
possible at the next operation.
7. With all implements lowered to the
ground, coat any exposed hydrau-
lic cylinder piston rods with grease.
8. Remove the battery from the tractor.
Store the battery following the bat-
tery storage procedures. (See "Bat-
tery condition" in 100 hours in peri-
odic service section.)
9. Keep the tractor in a dry place
where the tractor is sheltered from
rain. Cover the tractor.
10. Clean the engine components as
well as the tractor.
11. Add grease to all the lubrication
filler ports of the tractor.
12. Replace any worn or damaged
component.