Kioti Daedong EX35C, Руководство пользователя

Страница: 195 / 229

7
-32
EX35(C)/EX40(C)/EX45(C)/EX50(C)
1. Make sure that the amount of fuel in
the fuel tank is sufficient.
H11O646A
ANTI-FREEZE
* At 760 mmHg pressure (atmosph-
eric). A higher boiling point is ob-
tained by using a radiator pressure
cap.
This tractor is filled with 50% of ethyl-
ene glycol at factory.
If the anti-freeze has been replaced by
tap water later on, the coolant can be
frozen, leading to damage to the cylin-
der and radiator when the ambient tem-
perature is below 0
.
Therefore, make sure to change water
into anti-freeze before winter season
comes.
When changing the anti-freeze with one
of another type, flush the cooling sys-
tem several times and contact a pro-
fessional for the mixture ratio.
Vol. %
Anti-freeze
40
50
Freezing Point
°C
-24
-37
°F
-12
-34
Boiling Point*
°C
106
108
°F
222
226
The temperatures shown on the left
are industry standards that neces-
sitate a minimum glycol content in
the concentrated anti-freeze.
When the coolant level drops due
to evaporation, add water only. In
case of leakage, add anti-freeze
and water in the specified mixing
ratio.
Anti-freeze absorbs moisture. Keep
unused anti-freeze in a tightly
sealed container.
Do not use radiator cleaning agents
when anti-freeze has been added
to the cooling water. (Anti-freeze
contains an anti-corrosive agent,
which will react with the radiator
cleaning agent forming sludge
which will affect the engine parts.)
NOTE
BLEEDING FUEL SYSTEM(AK)
(1) Fuel Cock
(A) Close
(B)Open (C)Air Bleeding