Kioti Daedong EX35C, Руководство пользователя

Страница: 152 / 229

6
-5
3-POINT HITCH IMPLEMENT OPERATION
6
(1) Top Link (2) Pin
(3) Retainer Pin (4) Top Link Hook
1. Install the top link to the desired
position, and install the pin and re-
tainer pin.
2. Fix Top link with fixed nut after ad-
justing top link.
3. The position for mounting Top link
varies depending on the kind of
attachment.
H11O536A
WARNING
!!!!!
Stop the engine and lower the
attachment on the ground prior
to disconnecting the lift rod
from the lower link. Check that
the attachment for proper sup-
porting and there’s pressure re-
mained in the hydraulic system
to remove the lift rod holding
the pin. To eliminate the re-
mained pressure, move the hy-
draulic adjusting lever back and
forth several times.
ADJUSTMENT OF TOP LINK
When there is no implement
attached, fix the lower link to the
check link (LH/RH) so that it does
not contact with the rear wheel.
Secure the top link to the hook.
NOTE
H23O545A
ADJUSTMENT OF STABILIZER
(1) Telescopic Stabilizers (2) Pin
1. Adjust the telescopic stabilizers to
control horizontal sway of the
implement. It is also used to set the
implement on the back of the trac-
tor in center.
2. To adjust the check link, pull out the
pin and adjust it until the desired
transverse moving distance is
obtained.
3. Fit the pin to the gardening hole
(fixed) for normal operation and
long hole (moving) for draft work.