Kioti Daedong EX35C, Руководство пользователя

Страница: 125 / 229

5
-8
EX35(C)/EX40(C)/EX45(C)/EX50(C)
STOPPING THE ENGINE
1. Make sure to reduce the engine rpm
before stopping the engine.
2. Depress the clutch pedal and put
all shift levers in the neutral position.
3. Run the engine at the idle speed for
approx. 2 to 3 minutes, and then
turn the key switch to the “OFF”
position to stop the engine.
4. Remove the ignition key.
T85O532A
Turn off all the electrical devices
and remove the ignition key be-
fore leaving the tractor.
Also, be careful not to lose the
ignition key as the keys used for
all KIOTI tractors are the same
in shape.
The horn, turn signal lamp and
hazard lamp can be operated
without the key inserted.
However, using these compo-
nents without the engine started
can discharge the battery.
IMPORTANT
WARMING UP
It is recommended always to warm up
the engine before driving in order to
maintain the durability of the engine
and prevent malfunction of the engine.
Before warming up the engine, make
sure that each part in the engine is
properly lubricated and each hydrau-
lic part is in a perfect condition in or-
der to prevent malfunction in the en-
gine as well as the hydraulic system.
HOW TO WARM UP ENGINE
1. Start the engine and run it at a low
speed and without load for approx.
3 to 4 minutes.
2. In cold weather, increase the warm-
ing up time to 10 minutes.
3. If it is very cold, warm up the en-
gine for approx. 15 minutes.
4. The engine throttle can be open for
50 % in order to shorten the warm-
ing up time.
5. The engine is sufficiently warmed
up when the temperature gauge on
the instrument panel indicates 1/4
of the normal temperature range,
regardless of the warming-up time.
WARNING
!!!!!
Never touch the muffler or hot
covers until they are cooled
down after running the engine
or driving the tractor.