Kioti Daedong EX35C, Руководство пользователя

Страница: 126 / 229

5
-9
OPERATION
5
WARNING
!!!!!
Warming up the engine exces-
sively increases fuel consump-
tion and affects the durability of
the tractor negatively.
Never warm up the engine and
leave the tractor for an extended
period of time. It can cause fire
and an accident.
H11O509A
JUMP STARTING
(1) Dead (3) Helper Battery
(2) Jumper Cables
If the battery is discharged and the
engine cannot be started, it is possible
to start the engine by connecting the
discharged battery to a battery from
another tractor or other extra battery.
1. Check that the voltage of the dis-
charged battery is same as the volt-
age of the other tractor or vehicle
for jump start (specification for this
tractor: 12 V).
2. Check the length of the jump cable
and position another tractor near
the tractor with the discharged
battery. Then, put all the shift levers
in the neutral position, apply the
parking brake, and stop the engine.
3. Wear protective glasses and gloves
and open the hoods of both tractors.
Remove the battery terminal cover
as necessary.
4. Connect the alligator clips on both
ends of the red positive cable to the
positive terminals of both batteries.
5. Connect one clip of the black nega-
tive cable to the negative terminal
of the normal battery and the other
clip to the tractor body with the dis-
charged battery. Make sure to con-
nect the clip to the body part with-
out paint.
6. Do not increase the work load rap-
idly after starting work.
7. Run the engine without load for
approx. 2 to 3 minutes before stop-
ping the engine after work.