FP 25/50 E / FP 25/50 D / FP 10/50 A
Repair and Adjustments
Issue: 06/2011
89
Coarse Adjustment
• The reflector can be adjusted by turning the adjusting screws on the reflector holder
bars.
• Adjust the space between the reflector set screws and the reflector surface to
0.2 mm. The set screws (black arrow) prevent the reflector from sliding back into the
reflector holder rods.
Pushing the reflector towards the holder rods the set screws should stop it at
0.5 to 1 mm movement.
ATTENTION
The set screws must not touch the reflector surface if properly adjusted.
Due to mechanical strain the reflector may break if not properly adjusted.
• Tighten the handle star on the upper mirror holder.
ATTENTION
Be careful that the main reflector will not be clamped too toughly - during the operation
the reflector expands and therefore could break.
X
NOTE
The fine adjustment has to be carried out by service from Kinoton.
• Insert the xenon bulb.
• Close the lamphouse.
• Adjust the screen of illumination
Содержание FP 25 E PREMIERE
