32
Solar System Installation Guide
Labels
The following labels must be cut out, placed in the included plastic bags and be attached to the correct locations on the
system
.
Solar System Isolation
Normally Open
Solar System Isolation
Normally Open
Fill Drain Valve
50% Propylene Glycol / 50% Water –
Freeze Tolerance Limit –49°F
Heat Exchanger Type SW AWWA Fluid Class II
Warning: Fluid may be discharged at high temperature and
pressure
Warning: No other fluid shall be used that would change the
original classification of this system. Unauthorized alterations to
this system could result in a hazardous health condition. Refer
to manual for more information
Place this label on the pump station.
Freeze Protection:
Keep the temperature in this room above 32°F
Maximum operating:
Temperature: 200°F
Pressure: 45 psi
This label is to be placed on tank.
Solar Tank Isolation
Normally Open
Tyfocor Discharge
See Manual
Potable Water
Discharge
See Manual
