4
User Instruction Manual
Kingspan SafePro 2
Anchor and Cable System
2.0 The SafePro 2 Anchor
2.1 The Kingspan SafePro 2 Anchor
The SafePro 2 Anchor provides a secure anchor point for a worker at height, close to an exposed edge or other fall hazards, when used
in conjunction with associated PPE, such as a full body harness and safety lanyard.
There are two types of Anchors within the range, the SpiraTech Anchor and the Tip Over Anchor.
Both Anchors are modular in design allowing for speed of fitting and use.
The Anchors have been tested and conforms to the requirements of:
– EN795 2012 TYPE A
– CEN TS 16415:2013 Type A
The SafePro 2 Anchors have been designed to re-orientate and deploy an energy absorber in the event of a fall,
there by reducing the load transferred to the roofing system as compared to a rigid anchor. The Anchors can be used for both fall
arrest and work restraint applications.
The Anchors can be installed on KS1000 RW, KS500/1000 Zip, KS1000 TD and KS1000 LP.
Both Anchors allow the user to walk 360 degrees around the Anchor without needing to reorientate the lanyard or connectors. The
Anchor incorporates full weather sealing to combat water ingress, and allows different roof membranes to be fitted and sealed
around the Anchors for true weather proofing.
3M™ DBI-SALA
®
RoofSafe Anchor and Cable System
The RoofSafe Anchor
Section 2.0
4
2.1
The 3M™ DBI-SALA
®
RoofSafe Anchor
The 3M DBI-SALA RoofSafe Anchor provides a secure anchor point for a worker at height, close to an exposed edge
or other fall hazards, when used in conjunction with associated PPE, such as a full body harness and safety lanyard.
There are two types of Anchors within the range, the SpiraTech Anchor (CE only) and the Tip Over Anchor.
Both Anchors are modular in design allowing for speed of fitting and use.
The Anchors have been tested and conforms to the requirements of:
• EN795 2012 TYPE A
• CEN TS 16415:2013 Type A
• OSHA 1926.502 M
• ANSI Z359.1 2007
• AS / NZS 1891.2
The 3M DBI-SALA RoofSafe Anchors have been designed to re-orientate and deploy an energy absorber in the event of a fall,
there by reducing the load transferred to the roofing system as compared to a rigid anchor. The Anchors can be used for both fall
arrest and work restraint applications.
The Anchors can be installed on standing seam, bituminous and PVC membrane, composite / built up and membrane and fragile
roofing systems.
Both Anchors allow the user to walk 360 degrees around the Anchor without needing to reorientate the lanyard or connectors.
The Anchor incorporates full weather sealing to combat water ingress, and allows different roof membranes to be fitted
and sealed around the Anchors for true weather proofing.
SpiraTech Anchor
Single Point Tip
Over Anchor
Can be used as a single point
Anchor for up to two users.
CE Only.
Can be used as a single point
Anchor for one user. (to conform
to ANSI please use RA Single
Point Eye AM,7241168).
Form No: 5903917 Rev: D
3M™ DBI-SALA
®
RoofSafe Anchor and Cable System
The RoofSafe Anchor
Section 2.0
4
2.1
The 3M™ DBI-SALA
®
RoofSafe Anchor
The 3M DBI-SALA RoofSafe Anchor provides a secure anchor point for a worker at height, close to an exposed edge
or other fall hazards, when used in conjunction with associated PPE, such as a full body harness and safety lanyard.
There are two types of Anchors within the range, the SpiraTech Anchor (CE only) and the Tip Over Anchor.
Both Anchors are modular in design allowing for speed of fitting and use.
The Anchors have been tested and conforms to the requirements of:
• EN795 2012 TYPE A
• CEN TS 16415:2013 Type A
• OSHA 1926.502 M
• ANSI Z359.1 2007
• AS / NZS 1891.2
The 3M DBI-SALA RoofSafe Anchors have been designed to re-orientate and deploy an energy absorber in the event of a fall,
there by reducing the load transferred to the roofing system as compared to a rigid anchor. The Anchors can be used for both fall
arrest and work restraint applications.
The Anchors can be installed on standing seam, bituminous and PVC membrane, composite / built up and membrane and fragile
roofing systems.
Both Anchors allow the user to walk 360 degrees around the Anchor without needing to reorientate the lanyard or connectors.
The Anchor incorporates full weather sealing to combat water ingress, and allows different roof membranes to be fitted
and sealed around the Anchors for true weather proofing.
SpiraTech Anchor
Single Point Tip
Over Anchor
Can be used as a single point
Anchor for up to two users.
CE Only.
Can be used as a single point
Anchor for one user. (to conform
to ANSI please use RA Single
Point Eye AM,7241168).
Form No: 5903917 Rev: D
End/Corner Anchor
Can be used as a single point Anchor for up to
two users.
Intermediate Point Tip Over Anchor
Can be used as a single point Anchor for one
user.
