21
User Instruction Manual
Kingspan SafePro 2
Anchor and Cable System
16.0 Using The System
16.1 User Equipment
Always wear a full body harness. The user should attach their shock absorbing lanyard to the rear ‘D’ ring of the harness.
This prevents the lanyard getting in the way during use. Always ensure that the locking mechanism of the carabiner is properly closed
before proceeding and get a second person to check this and all other attachments. In the event of a fall all equipment should be
removed from service and inspected by a Kingspan certified Installer before it can be possibly returned to service.
16.2 Accessing the System
Access to the System should be gained from a position of safety. If necessary the user should use other safety equipment, such as a
twin-tailed lanyard, to facilitate safe access to the attachment area.
16.3 Attaching to the System
The slider is designed in such a way that it is possible to enter the system at any point. They’re carried out as follows:
To open 8mm slider, slide top tab to the
left and lift upwards.
Attach the 2001000 carabiner andlanyard.
Ensure that carabiner number matches
number engraved around the slot of the
8mm slider.
Place the 8mm slider onto the cable and
close by moving top tab downwards and
to the right.
You are now safely attached to the cable
system. To remove the 8mm slider from
the cable follow the previous steps in
reverse order from 5-1.
Ensure that holes are aligned.
WARNING!
Only use Kingspan’s 2001000
carabiner with the 8mm slider to ensure
system integrity.
N.B: Remember to inspect your
PPE before each use!
01
04
02
05
03
