26
User Instruction Manual
Kingspan SafePro 2
Anchor and Cable System
20.0 Maintenance Check List
Maintenance Check Sheet
CUSTOMER INFORMATION
Site Name:
Site Address:
INSPECTOR INFORMATION
Kingspan Protection ID No:
Name:
Address:
Telephone:
INSPECTION INFORMATION
Inspection Date:
System Type:
KS1000 RW
KS1000 LP
KS500 Zip
KS1000 TP
KS1000 Zip
SafePro 2
ALL CHECKS MUST BE CARRIED OUT IN ACCORDANCE WITH CURRENT TECHNICAL DOCUMENTATION AND INSTRUCTIONS.
Check List
Notes
All Systems
Visual inspection. Check system for signs of a fall event
Check system ID Tag is present and legilble
Check all components for signs of damage, rusting or severe corrosion
Check all components are isolated from disimilar metals
Check integrity of structure
Check split pins present and in good condition
Check that Unieyes/End Anchorages are correctly orientated and in good condition
Check fasteners are correctly tightened. Use Torque Wrench as required
Proof load test concrete fixings to 6kN
Clean system as necessary
Check Attachment Devices operate correctly
Cable Systems
Check cable condition for fretting, corrosion, signs of contamination and damage
Cable tension OK
Check SafePro 2 Tensioners for correct thread engagement and ensure lock nuts are tight
Check inline energy absorbing elements are intact
Check intermediate brackets are not deployed and nylon shear pins are intact
SafePro 2 Anchors
Check energy absorbing elements are not deployed
Ensure all waterproofing elements are present and intact
Check standing seam clamps with a torque wrench
Rail System
Check system, carriage and end stops are securely fixed
Check system for cracks in rail
Check rail for signs of deformation
Roofsafe rivets hand checked for secure fixing - tug anchorage at each section
Check all joints are securely fixed
NOTES AND IMPORTANT OBSERVATIONS
System in good condition and cleared for use
System not acceptable, further action required
Inspector’s
Signature
Name
Next Inspection
Due Date
