26
Log Assembly (continued)
STEP 8 -
Break glowing ember insulation into
1/4” pieces. Place embers onto front burner but
ensure you do not cover air slot that is located
between front burner and false bottom
.
STEP 9 -
On Log #5, you will find a location slot
that will align with the middle grate bar. Slide
into place and rest Log #5 onto Log #2’s flat
area.
STEP 10 -
Position Log #6 up against the 2nd
grate from the right. Log #6 will rest onto Log
#2 (Do not position over main burner ports).
STEP 11 -
Lean Log #7 against the 2nd grate
from the left and notch on Log #5 (Do not posi-
tion over burner ports).
STEP 12 -
Place rock onto the false bottom
only. NOTE: Do not cover air slot that is
between grate and false bottom.
STEP 13 -
Sprinkle vermiculite over rocks to
complete the log assembly.
