Kingsman MQVL60LP, Руководство по установке

Страница: 42 / 83

MQVL60RGB Glass Back Liner Installation Option
STEP TWO: Remove Media Fence frim Media Tray with [Qty 3] Lower Liner Clips Attached.
STEP THREE :
Install one
Glass Back
Liner at each
end of the
firebox. Attach
with 1 DT
Screw on top
corners and 2 at
bottom.
STEP FOUR: Install remaining Glass Back Liner in Center
Position in firebox. Attach with 2 DT Screws on top and 2 at
bottom.
STEP FIVE: Reinstall Media Fence as shown, with one row of slots exposed.
NOTE: Install
MQVL60RGB
Before
installing
MQVL48RGE
End Panel Kit.
CONTENTS:
GLASS BACK
LINER X 3
BACK CLIP
(DISCARD)
MQVL60RGB - BACK PANEL KIT
⚠
CAUTION
-NOT TEMPERED GLASS-
-EXTREMELY FRAGILE-
– HANDLE WITH CARE-
STEP ONE: Remove Liner
Clips and screws from
inside of firebox with a 1/4”
hex driver. Discard Back
Clip but Keep Screws.
DT SCREW
DT SCREW
MEDIA FENCE
LOWER LINER CLIP
AT ENDS
LOWER LINER CLIP AT
CENTER
MEDIA FENCE
MEDIA FENCE
TOP CORNERS
BOTTOM CORNERS
TOP OF FIREBOX
⚠
Note: Discoloration
of Glass Liners Is Not
Covered Under
Warranty.
Glass Liners may
discolour during normal
operation of your
appliance.
This is normal, and not
considered a defect.
LOWER LINER CLIP (X3)
NOT REQUIRED
LOWER LINER CLIP AT
ENDS- NOT REQUIRED
LOWER LINER
CLIP AT CENTER-
NOT REQUIRED
MEDIA FENCE
MEDIA FENCE
SLOTS
SLOTS
You are now ready to install MQVL48RGE if desired.
42