Kingsman MQVL60LP, Руководство по установке

Страница: 40 / 83

VL60PLB Porcelain Back Liner Installation Option
STEP TWO: Remove Media Fence frim Media Tray with [Qty 3] Lower Liner Clips Attached.
STEP THREE :
Install one Liner
at each end of
the firebox.
Attach with 1
DT Screw on
top corners and
2 at bottom.
STEP FOUR: Install remaining Liner in Center Position in
firebox. Attach with 2 DT Screws on top and 2 at bottom.
STEP FIVE: Reinstall Media Fence as shown, with one row of slots exposed.
NOTE: Install
VL60RGB
Before
installing
MQVL48PLE
End Panel Kit.
CONTENTS:
PORCELAIN
BACK LINER X 3
BACK CLIP
(DISCARD)
MQVL60RGB - BACK PANEL KIT
STEP ONE: Remove Back
Clip and screws from inside
of firebox with a 1/4” hex
driver. Discard Back Clip
but Keep Screws.
DT SCREW
DT SCREW
MEDIA FENCE
-REQUIRED-
DO NOT
DISCARD
LOWER LINER CLIP
AT ENDS
LOWER LINER CLIP AT
CENTER
MEDIA FENCE
MEDIA FENCE
TOP CORNERS
BOTTOM CORNERS
TOP OF FIREBOX
⚠
Note: Discoloration
of Porcelain Liners Is
Not Covered Under
Warranty.
Glass Liners may
discolour during normal
operation of your
appliance.
This is normal, and not
considered a defect.
LOWER LINER CLIP (X3)
NOT REQUIRED
LOWER LINER CLIP AT
ENDS- NOT REQUIRED
LOWER LINER
CLIP AT CENTER-
NOT REQUIRED
MEDIA FENCE
MEDIA FENCE
SLOTS
SLOTS
You are now ready to install VL48PLE if desired.
40