16
METAL OR BRICK PANEL INSTALLATION
Brick Panels are optional with this
unit.
Insert Metal or Brick Panels into
place. Using a retaining clip, position
and screw to top of firebox. Refer to
Figure #3.
FIGURE 3
Brick Panels
Shown
TOP
VIEW
FIGURE 5
LOG INSTALLATION
The KINGSMAN Log set has been numbered for ease
of installation.
CRUSHED ROCK AND GLOWING EMBER INSTALLATION
1.
Apply Crushed Rock to bottom pan and
to Grate area. Do Not cover Burner with
Crushed Rock. Keep dust away from Burner
Ports to avoid plugging them. Any fine dust
found in bottom of bag is not to be used.
2.
To apply Glowing Embers tear embers
into pieces and place along perimeter
Burners, as well as on top of Crushed
Rock in Grate area only.
Care should be taken to shred the
embers into thin, small irregular pieces as
only the exposed edges of the fibre hairs
will glow. The Ember material will only glow
when exposed to direct flame. However,
care should be taken not to block burner
ports.
Blocked Burner Ports can cause an
incorrect flame pattern, carbon and delayed
ignition.
If in the event you require additional Crushed
Rock or Glowing Embers please contact your
local KINGSMAN Dealer.
FIGURE 4
CRUSHED
ROCK
GLOWING
EMBERS
