Kingsman IDV33-IDV36, Руководство по установке

Страница: 20 / 29

20
LOG PLACEMENT - LOGF35
L
OGF35 Log Set and Glowing Embers Shows rear log positioning bracket and 4 pin
locating positions.
Log A has 2 locating holes, position the 2 holes
on the log over the 2 pins on the left side of the
log mounting pan as shown in the picture. Log B has 2 locating holes, position the 2 holes
on the log over the 2 pins on the right side of
the log mounting pan as shown in the picture.
Log C has to be lowered into position just
behind logs A and B. Log C has an area
notched out of the rear of it to fit over rear
positioning bracket as shown in the picture. A bag of Ember chunks is supplied with the log
set, it is very inportqant that these chunks are
placed onto the front burner and log mounting
pan as shown in the picture, spread the ember
chunks out no more than on Layer deep.
NOTE: IF YOU DO NOT FOLLOW THIS
INSTRUCTION CORRECTLY SOOTING
PROBLEMS CAN OCCUR.