Kingsman IDV33-IDV36, Руководство по установке

Страница: 12 / 29

12
IDV33 / IDV36 Riser Kit and Levelling Instructions
When installing insert it may be necessary to
support back of unit. To support back of insert,
there are two levelling plates right and left of unit.
Step 1: Measure height required to level unit.
Step 2: Remove 2 outer screws and loosen center
screw holding each plate into position.
Step 3: Slide plates to the required height and
align with appropriate holes. Each set of
holes equals to a 1/4” of movement up to
a maximum of four inches. Insert and
tighten all screws. (eg: 1” of movement
equals to 4 holes)
IDV33 / IDV36
INSERT
LEVELLING
INSTRUCTIONS
IDV33 / IDV36 INSERT RISER KIT INSTALLATION INSTRUCTIONS
MODEL No.: I33R40 / I33R44
Step 1: Measure height required to make flush with base of unit, Fig. 1. If measurement equals to the height of riser kit 2.5” skip
to Step 3. No adjustment will be required.
Step 2: Adjust levelling legs to required height in Step 1, Fig. 3 (Detail A).
Step 3: Locate mounting holes punched into base right and left of unit. Place riser assembly under front of insert and fasten to
base with supplied screws, Fig. 2.