Kingfisher KI 6680, Руководство пользователя

Страница: 4 / 12

KI6680, Mini Fiber Inspection Probe User Manual
Revision 4 Date: 31/05/2018 Page 4 of 12
3.3. Installing Inspection Adaptor
Place an inspection adaptor onto instrument’ s adaptor head, make sure that the pin is aligned into the
groove, tighten locknut on adaptor head by turning it in the direction shown in diagram below.
In case of MPO Inspection adaptor,
Remove adaptor head on instrument. Place MPO inspection adaptor on instrument, make sure that pin
on adaptor is aligned into the groove on instrument, tighten locknut by turning it in the direction shown
in diagram below.
MPO inspection adaptor comes with both a PC and an APC tips which are interchangeable by loosening
/ tightening 2 crews as shown below,
Adaptor
Groove
Adaptor head
Pin
Locknut
Turn locknut
to tighten
Align Pin
into Groove
Groove Pin
Must be aligned
Turn locknut to tighten
Locknut
Screws
PC tip
APC tip