KI6680, Mini Fiber Inspection Probe User Manual
Revision 4 Date: 31/05/2018 Page 6 of 12
4.3. Imaging Software Operation
Tab icon,
on your Smart Device to start the imaging software. Turn
Focus Ring
(clockwise /
anticlockwise) of instrument to obtain a sharp image on the Main Display, see figure below for associated
menus and their respective functions.
If prompted with the message,
“Device connect failed”, check that
WiFi mode on instrument is enabled
and stable (indicated by the green LED,
WiFi Mode Status Indicator
which should be lighted up
continuously), and that WiFi connection on your smart device is enabled. You may need to re-establish
the connection.
4.4. To Captured and Save Images on Smart Devices
The captured images can be saved in default file names or preferred file names.
•
To capture and save images in files with default file names:
On the Main Display, tab on the Image Capturing symbol (see picture on next page), a small window
displaying the captured image will appear on the bottom left corner. The image will be saved in
default file name with the format, year-month-date-time. The file name auto increments after each
image saving operation.
Tab this
To list the saved image files. Tab
on the desire file to open it
To adjust display brightness
To reset display brightness
to default
To display user manual
See section 4.4.
Tab to view image
horizontally (200x
magnification) or vertically
(400x magnification).
End-face image of
inserted fiber connector
at adaptor tip.
The image can be zoom
in & out with finger
touches.
Note:
While at submenus or file/data displays, press R
eturn
button on your Smart Device to close submenu or to go back to previous display.
Main Display
Main Menu
