Kingfisher 5059340255828 Скачать руководство пользователя

Страница: 52 / 65

Care and maintenance

detail...

FPCSP41-3

General Cleaning

8. Replace with a new spark plug if either the electrode or the insulation is

damaged.

9. When replacing the spark plug (7a), first screw it in hand tight and then lightly

tighten it with the multi-tool (31).

10. Refit the spark plug connector (7); ensure the rubber pad around the spark

plug connector is in correct position.

WARNING!

Do not over tighten the spark plug (7a) to avoid any

damage!

11. Re-attach the air filter cover (6a) and secure it with the fixing screw (6)

afterward.

Fuel tank

1. Empty the fuel tank when storing the product over 30 days to prevent the fuel

deteriorating.

2. Unscrew and remove the fuel tank cap (25) and use a proper fuel pump to

empty the fuel into a suitable container.

WARNING!

Do not store the fuel in the fuel mixing bottle (30)!

Fuel filter

The fuel tank of this product is fitted with a filter, which is attached on the end of

the fuel pipe. Ask an authorised service centre or a similarly qualified person to

check and replace the filter at regular intervals if required.

Carburettor

The carburettor has been carefully set at the factory. The cutting attachment must

not rotate in correct idle speed. Adjustment may be necessary if you notice that

the engine is not in correct idle speed (i.e engine stalls or the cutting attachment

keeps rotating when the throttle is released). Idle speed adjustment must be

carried out by a trained technician or Contact an authorised service centre or

dealer to do.

WARNING!

Keep others away when masking idle speed adjustment.

Keep cutting attachment off the ground and will not contact with any

object. The cutting attachment will be running during this procedure.

Wear protective equipment and observe all safety precautions.

MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd 52

3/2/22 11:36 AM

Содержание 5059340255828


































































Результаты поиска

Содержание 5059340255828

Отзывы:

Похожие инструкции для 5059340255828

Бренды по названию

Популярные бренды

Kingfisher 5059340255828, Руководство пользователя

Результаты поиска

Содержание 5059340255828

Отзывы:

Похожие инструкции для 5059340255828

Бренды по названию

Популярные бренды